All ProductsNinjaTrader 7 Add-onsNinjaTrader 8 Add-onsFree ToolsUtilities

Tuesday, June 7, 2022 Range Volume Profile for NT8 was updated (build 1.4.0.5):
• Added 'Restore Real-Time Mode' option for Custom Range Profiles (4. Range Profiles section → General Settings group → Restore Real-Time Mode).
• Fixed incorrect histogram rendering specific to some spot instruments/data feeds and Minute Series Data Source.

Thursday, June 2, 2022 Swings Analyzer for NT8 was updated (build 1.4.2.4):
• Added 'Back Highlighting by Delta' function (disabled by default).

Friday, May 13, 2022 Swings Analyzer for NT8 was updated (build 1.4.2.3):
• Added 'Volume Delta Threshold', 'Tick Delta Threshold' experimental options to Alternative Structure Mode.
• Added 'Align Counting To Session Beginning' option to reset price swings lay out at each session start (enabled by default).

Wednesday, May 11, 2022 Swings Analyzer for NT8 was updated (build 1.4.2.2):
• Added 'Volume Step', 'Ticks Step' and 'Price Range Threshold' options to Alternative Structure Mode (non price swings based lay out).

Saturday, May 7, 2022 Levels Marker for NT8 was updated (build 1.4.0.3):
• Added Label Horizontal Alignment and Horizontal Offset properties.
• Minor fixes and improvements.

Friday, April 29, 2022 Swings Analyzer for NT8 was updated (build 1.4.2.1):
• Added Alternative Structure Mode: N-Bars (non price swings based lay out).
In order to enable the N-Bars mode via SwA Control Panel: switch the radio button from "Price Swings" to "Alternative Structure Mode", then specify a desirable number of bars step and click "Reload NinjaScript to Apply" button.

Monday, April 25, 2022 Orderflow Bars for NT8 was updated (build 2.3.0.7):
• Optimized processing of “virgin” levels generated by the 'Imbalance Stripes' and 'POC Stripes' studies to significantly minimize CPU-utilization by these studies functioning in live.

OfB NT8 - Delta Histogram on Sided Ladder+ Look • Added options to visualize delta as histogram bars at Delta column in the Sided Ladder+ Look mode.

OfB NT8 - New appearance options for Delta-vs-Price Div Marks • Added 'Arrangement' and 'Direction' marks appearance options to both 'Basic Bar Delta-vs-Price Divergence' and 'Bar Delta vs Bar-to-Bar Tendency Divergence' studies.

Saturday, April 9, 2022 Spread Tape for NT8 was updated (build 2.3.0.9):
Note: The Spread Tape NT8 indicator is a part of Reconstructed Tape NT8 Assembly 2.3.0.9.

• Added 'Absorption' on-chart study that plots marks when significant amount of contracts are traded at one side at single price level within short period of time. (Note: Ninja's Tick Replay function must be enabled to plot on historical bars.)
• Added Audio Alerts to both 'Activity Blast' and 'Absorption' studies.
• Minor fixes and improvements.

Thursday, March 31, 2022 Spread Tape for NT8 was updated (build 2.3.0.8):
The Spread Tape NT8 indicator was build into Reconstructed Tape NT8 Assembly 2.3.0.8 to make it available free to all Reconstructed Tape license owners.
• Added 'Activity Blast' on-chart study. Note: Ninja's Tick Replay function must be enabled to plot on historical bars.

Tuesday, March 29, 2022 Levels Marker for NT8 was updated (build 1.4.0.2):
• Added price level default properties (see Indicators properties window -> Price Level Defaults settings group) allowing to set up appearance properties of newly created price levels.
• Added 'Inherit From Last Level' option in the 'Lm' toolbar menu as an alternative way to control appearance properties of creating price levels. If the option is enabled then a new creating price level will inherit of appearance properties from the last created price level.

Wednesday, March 23, 2022 Spread Tape for NT8 was released (build 1.0.0.1):
The version is only available for testers.
STape NT8

Monday, March 7, 2022 Swings Analyzer for NT8 was updated (build 1.4.1.1):
• Added option to choose price units between Price Points (default) and Price Ticks of the Price Deviation Threshold property for easier setting-up.
• Added 'Visual Filter' function to hide plots/info boxes of price swings that do not meet filter criteria (using Price Range, Volume and Ticks constraints).
• Added 'Shared Group' option that enables identity of the 'Price Deviation Threshold' and 'Visibility Filter' settings between different Swings Analyzer instances of the same Shared Group. The function can be useful when working with several indicator instances on different sub-panels of the same chart. SwA NT8 - Shared Group

Wednesday, February 23, 2022 Buy-Sell Pressure for NT8 was updated (build 1.4.0.5):
• Improved Data Table coloring. Added option to apply same coloring as for Delta row cells to corresponding Total row cells.
• Added option to show/hide data table legend.
• Added 'Instance Color' option to allow to dissect by color the toolbar buttons of different Buy-Sell Pressure indicator instances on the same chart.
• Tooltip of 'BSP' toolbar button will show hint of which exactly panel/sub-panel the related indicator instance is applied on.
(how to update)

Saturday, February 12, 2022 Swings Analyzer for NT8 was updated (build 1.4.0.10):
Important!: It may be necessary to re-configure the Swings Analyzer indicators applied on charts and re-save related Workspace(s) after installation of the updated version due to significant changes of the indicator settings structure.

Multi Plots mode:
• Added plotting of cumulative Volume Per PriceTick Move and Ticks Per PriceTick Move metrics which can be considered as a measure of "effort vs result" .
• Improved plots customizability of any metric:
 - Added option to color graphs by swing delta or by swing direction.
 - Current value Label can be enabled/disabled individually for each metric plot.
 - Improved auto-scaling depending on the plot style and plot orientation mode.

Pivot Points Info (On Price Panel mode):
• Added separate options to Print Volume and Print Volume Delta, Print Ticks and Print Tick Delta.
• Added Large Numbers Max Shortening' property to select shortening degree of large Volume and Ticks numbers printed in info blocks.
• The abbreviations "∑V" "ΔV", "∑T" and "ΔT" will be shown only if both Volume and Ticks metrics are enabled to print.

Sunday, January 30, 2022 Levels Marker for NT8 was updated (build 1.4.0.1):
• Added function to plot crossover marks by means of the helper indicator dt Levels Marker Crosspoints
(watch a short how-to-configure example).
• Minor fixes.

Monday, January 24, 2022 Range Volume Profile for NT8 was updated (build 1.4.0.3):
RVP NT8 - Conditional Stripes Intro • Added 'Conditional Stripes' Study intended to highlight profile price areas (stripes) based on various criteria: filter by row volume, ticks, delta.
(how to update)

Monday, January 10, 2022 Orderflow Bars for NT8 was updated (build 2.3.0.5):
• In the 'Imbalance Stripes' study added filtering by row absolute value (i.e. number of contracts or trades at row, depending on the chosen Base Metric).
• Added analogous 'POC Stripes' study to plot Bar POC price levels.

Thursday, December 30, 2021 Range Volume Profile for NT8 was updated (build 1.4.0.1):
• Core: optimizations of historical and real-time data processing.
(how to update)

Thursday, December 23, 2021 Orderflow Bars for NT8 was updated (build 2.3.0.4):
• Added 'Imbalance Stripes' study. The study plots price stripes based on the most imbalanced areas of bar ladders. Both Row Imbalance and Diagonal Imbalance related criteria can be set.
OfB NT8 - Imbalance Stripes

Friday, December 10, 2021 Buy-Sell Pressure for NT8 was updated (build 1.4.0.2):
• Added option and corresponding controls to the BSP Control Panel to print bar total value (bar volume or ticks count depending on the chosen metric) in the Current Bar Mark .
• Fixed color fading of the Current Bar Mark.
(how to update)

Sunday, December 5, 2021 Swings Analyzer for NT8 was updated (build 1.4.0.8):
Multi Plots mode:
• Added plotting of cumulative Average Trade Size (ATS) metric of price swing.

Wednesday, December 1, 2021 Dynamic Balance Levels for NT8 was updated (build 1.3.0.4).
Changed inbuilt dt Dynamic Test Levels indicator:
• Added function of Naked levels Styling by Number of Test. Yet untested Naked levels will be colored by the original style. By default the function is disabled.

Monday, November 29, 2021 Orderflow Bars for NT8 was updated (build 2.3.0.2):
• Added printing of 'Session Cumulative Volume-Delta' and 'Session Cumulative Tick-Delta' Data Table rows. These rows are disabled by default. To enable check the related options in the Data Table tab of the OfB Control Panel.
• Other minor fixes and improvements.

Thursday, November 25, 2021 Dynamic Balance Levels for NT8 was updated (build 1.3.0.3).
Changed inbuilt dt Dynamic Test Levels indicator:
• Added detection and plotting of intraday micro Gaps and Session Opening Gaps. Intraday micro Gaps can usually be considered as short-term price rejection areas.
• Displaying of Session Opening Gaps can be disabled through DTL toolbar menu.

Tuesday, November 23, 2021 Range Volume Profile for NT8 was updated (build 1.3.0.3):
• Minor improvements.

Sunday, November 21, 2021 Reconstructed Tape for NT8 was updated (build 2.3.0.6):
• Fixed an exception that may happen on some systems when loading Tape windows.

Monday, November 15, 2021 Dynamic Test Levels NT8 indicator was released and added as a part of Dynamic Balance Levels for NT8.
The dt Dynamic Test Levels indicator marks out local extremes as Naked price levels on the chart.

Monday, November 8, 2021 Reconstructed Tape for NT8 was updated (build 2.3.0.5):
• Minor fixes and improvements.

Sunday, October 31, 2021 Reconstructed Tape for NT8 was updated (build 2.3.0.4):
RT NT8 - Spectrum Study • Added Spectrum study.

Monday, October 18, 2021 Swings Analyzer for NT8 was updated (build 1.4.0.7):
Multi Plots mode:
• Orientation option added also to the Volume Delta and Tick Delta Plots (for example, to get the Delta plots be oriented as Price Direction instead of Delta value of the related Price Swings).

Swing-to-Swing Analysis Marks study:
• Added more 'Price swings to compare' available options.
• Added Constraint on price distance between same extremes options (Min and Max allowed price distance values set in % of price range of prior swing). The constraint allows to filter and analyze price swings in various market conditions (for example, increase Minimum price distance to filter swings in trending market; or limit Maximum price distance to filter swings in balancing market).

• Minor fixes and improvements.

Monday, October 11, 2021 Reconstructed Tape for NT8 was updated (build 2.3.0.3):
RT NT8 - Highlighting prints at Daily High and Daily Low • Added displaying of Daily High & Low prices of the current trading session in the tape caption.
Since not all data feeds do provide daily high/low data messages and given that daily extremes provided by data feeds are generally based on unknown trading hours the Reconstructed Tape NT8 rather determines extreme prices from chart data with selected Trading Hours template taken into account.

• Added special highlighting of trades executed at current Daily High or Daily Low price.

Monday, October 11, 2021 Levels Visualizer for NT8 was updated (build 1.3.0.2):
• Improved text labels plotting at thin price level stripes: oversized labels will be plotted above or below related price level.

Tuesday, October 5, 2021 Swings Analyzer for NT8 was updated (build 1.4.0.5):
• Added Swing-to-Swing Analysis Marks study allowing to mark out neighboring price swings of same direction filtered by variety of conditions of comparison between the swings. See 'Swing-To-Swing Analysis Marks' tab in the OfB Control Panel.
The study can be applied if the indicator is added to Price Panel.
• Other fixes and improvements.

Tuesday, September 28, 2021 Inter-Sessional Average for NT8 was updated (build 1.3.0.2)
• Added color properties for numeric values separated from color properties of Plots.
(Both Inter-Sessional Average and Volume ISA were updated.)

Friday, September 24, 2021 Swings Analyzer for NT8 was updated (build 1.4.0.4):
• For the Multi Plots mode: Added option to plot metrics related to Potential Price Swing for 'Square Level' styled metrics. The Square Level plots of Potential Swing are drawn over the plots related to the developing price swing. Adjust Opacity and Brightness of the "potential" plots to get them be visually distinct.
• For the Multi Plots mode: Added Offset property for Current Value Labels.
• Added plotting of vertical delimiters at Pivot Points also when the indicator is applied to Price Chart.
• Appearance settings of vertical delimiters are segregated into separate settings section.

Thursday, September 9, 2021 Swings Analyzer for NT8 was updated (build 1.4.0.2):
SwA - Square Level Plot Styles • Added 'Square Level' and 'Filled Square Level' plot styles (in the "Multi Plots" Sub-panel appearance mode).
While the first two plot styles 'Line Chart' and 'Filled Area' are intended to plot swing metrics in dynamic, the new 'Square' styles are intended to plot resulted swing metrics as constant levels. This way can be handy in very short swings analysis.

SwA - Plot Orientation options • Added 'Orientation' parameter to the Accumulated Volume and Accumulated Ticks Plots (in the "Multi Plots" Sub-panel appearance mode) allowing the options to plot Volume or Ticks graphs at the same side off zero-line as Delta of the swing or as swing direction.

Download sample Workspace
Unzip xml into "<Your PC>\Documents\NinjaTrader 8\workspaces" folder and restart NinjaTrader to make the “Dt-SwA-Square-Plots” Workspace available to load in Workspaces menu of NinjaTrader Control Center.

Wednesday, September 1, 2021 Flow Speed for NT8 was released (build 1.3.0.1):
Advanced order-flow speed meter and visualizer for NinjaTrader 8.

×
please wait…